Ever since I can remember, bow manufacturers have been chasing performance goals. Be the fastest. Be the lightest. Be the smoothest. Be the quietest.
These are good goals. Noble goals.
The strides made in pursuit of these often come in small progressions, year after year; but as a whole the industry has certainly made gains. Just go shoot a 5, 10 or 15 year old bow next to one of the new flagship models.
While these tried and true goals are still a major focus, a new goal has emerged as a priority:
Be the easiest to tune.
I for one, have been excited to see this area of innovation explode the last few years. And the trend continues into 2027.
Let’s take a look at the new flagship bows for the coming year.
Mathews ARC APEX
Mathews is rounding out last year’s ARC lineup for 2027 with the new ARC APEX series. Coming in three axle-to-axle options, 28-inch, 32-inch and 35-inch, the ARC APEX offers a size for everyone.
With draw lengths spanning from 24.5 inches on the 28 up to 32.5 inches on the 35, everyone from smaller-framed archers to tall, long-armed hunters can get into a flagship setup.
The biggest change for 2027 is the Flite Cable Containment system, a micro-adjustable roller guard that shifts your cables in or out to clear tall vanes on fixed-blade setups without rotating nocks. It also gives you an easy way to clean up micro left or right paper tears before touching the limbs.
Mechanically, the shooting feel stays very close to last year’s bow with a new SWX-3 cam. Draw length and weight adjustments are still made by swapping modules on the cam, and you can still opt for the smoother shooting SWZ-mod if you’re willing to sacrifice a little fps for a nicer feeling draw cycle.
The SWX-3 also replaces the old timing holes with laser-etched graduation marks for quick, accurate sync checks. Different mod setups will index to different marks for a more accurate timing check no matter what your setup is. Mods also let you choose from a 80% or 85% let-off.
Mathews has shaved some excess material out of the riser’s sight window for a cleaner skeletonized look and introduced new finishes. You can now get the bow in solid Sage and Mossy Oak Fall Foliage across the board, plus exclusive White and Bronze options on the 35-inch model, likely aimed at the target archery crowd.
ARC APEX 28
| Price: | $1499 |
| Speed: | 347 fps |
| Axle-to-Axle: | 28″ |
| Weight: | 3.94 lbs |
| Brace Height: | 6″ |
| Draw Length: | 24.5-30″ |
| Draw Weight: | 55, 60, 65, 70, 75, 80 |
| Let-off: | 80 or 85% |
ARC APEX 32
| Price: | $1599 |
| Speed: | 346 fps |
| Axle-to-Axle: | 32″ |
| Weight: | 4.2 lbs |
| Brace Height: | 6″ |
| Draw Length: | 25.5-31″ |
| Draw Weight: | 55, 60, 65, 70, 75, 80 |
| Let-off: | 80 or 85% |
ARC APEX 35
| Price |
$1699 |
| Speed: | 337 fps |
| Axle-to-Axle: | 35″ |
| Weight: | 4.63 lbs |
| Brace Height: | 6.75″ |
| Draw Length: | 27-32.5″ |
| Draw Weight: | 55, 60, 65, 70, 75, 80 |
| Let-off: | 80 or 85% |
Hoyt Protocol RX
Hoyt’s flagship carbon lineup for 2027 arrives as the Protocol RX series, available in three distinct models: Protocol RX 29 (29.5-inch ATA), Protocol RX Ultra (33 1/16-inch ATA), and the Protocol RX Ultra LD.
New for this year are redesigned carbon risers engineered to shave weight while gaining stiffness., While they were at it, they also shifted positioning on their quiver and SL Side Bar mounting locations.
Powering the platform is the new HBX Select Cam, a refinement of the previous HBX Gen 4 cam designed to smooth out the transition on the front end of the draw cycle without loosing speed.
Shooters can stick with the G4 modules from last year for peak arrow speed or swap to the new ES modules to smooth out the back end of the draw cycle into the valley at only a slight loss in velocity.
Adjustability remains prioritized with quarter-inch draw length increments on each mod, selectable 75, 80, or 85 percent let-off settings, and a reversible draw-stop shoe that lets you choose between a “hard” or “extra-hard” back wall.
Beneath the new riser and cam tweaks, Hoyt smartly carried over the hardware that made last year’s bows so easy to set up. You still get the press-free XTS tuning system, which lets you clean up left or right paper tears in seconds by adjusting limb-tip tension with an Allen wrench.
The bow also retains its three-position front Picatinny sight rail, rear IMS dovetail rest mount, and Hoyt’s comfortable stock grip.
Sitting north of $2,200 bare, the Protocol RX commands a steep flagship price, so if you already have last year’s carbon Hoyt dialed in, there is no urgent need to upgrade.
For hunters looking for an ultralight, dead-in-the-hand carbon rig with an effortless draw cycle, however, it lands right at the top of the class.
Protocol RX 29
| Price: | $2199 |
| Speed: | 340 fps |
| Axle-to-Axle: | 29 1/2″ |
| Weight: | 3.9 lbs |
| Brace Height: | 6 5/8″ |
| Draw Length: | 25 – 30″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, or 85% |
Protocol RX Ultra
| Price: | $2249 |
| Speed: | 338 fps |
| Axle-to-Axle: | 33 1/8″ |
| Weight: | 4.1 lbs |
| Brace Height: | 6 5/8″ |
| Draw Length: | 26 – 31″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, or 85% |
Protocol RX LD
| Price: | $2249 |
| Speed: | 353 fps |
| Axle-to-Axle: | 33 5/16″ |
| Weight: | 4.3 lbs |
| Brace Height: | 7 5/8″ |
| Draw Length: | 31 1/4 – 33″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, or 85% |
Hoyt Protocol AX
If dropping over two grand on a carbon bow is not in the cards, Hoyt’s aluminum Protocol AX series delivers the exact same flagship technology at a much more approachable price point.
The AX line gives hunters four specific configurations to choose from: the AX 31, AX 33, AX Short Draw, and AX Long Draw.
Just like the premium carbon series, the machined aluminum riser was redesigned to drop physical weight and increase stiffness.
It is driven by the identical HBX Select Cam system, meaning you get the same smoothed out draw cycle and full compatibility with both the G4 speed mods and the new ultra-smooth ES mods.
All the high-end adjustability carries right over. You still get quarter-inch draw length tweaks, selectable let-off options, the reversible draw-stop shoe, and the press-free XTS tuning system to easily fix paper tears.
Packed with integrated Picatinny and IMS dovetail mounts, the Protocol AX brings top-tier Hoyt performance to the aluminum market, without holding anything back.. but the price. The AX line runs about $500 less than their carbon counterparts.
Protocol AX 31
| Price: | $1649 |
| Speed: | 342 fps |
| Axle-to-Axle: | 31 5/16″ |
| Weight: | 4.5 lbs |
| Brace Height: | 6″ |
| Draw Length: | 25 – 30″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, 85% |
Protocol AX 33
| Price: | $1699 |
| Speed: | 339 fps |
| Axle-to-Axle: | 33 3/8″ |
| Weight: | 4.7 lbs |
| Brace Height: | 6 1/2″ |
| Draw Length: | 26 – 31″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, 85% |
Protocol AX SD
| Price: | $1649 |
| Speed: | 310 fps |
| Axle-to-Axle: | 31 1/4″ |
| Weight: | 4.3 lbs |
| Brace Height: | 5 5/8″ |
| Draw Length: | 23 – 27″ |
| Draw Weight: | 40, 50, 60, 65, 70 |
| Let-off: | 75, 80, 85% |
Protocol AX LD
| Price: | $1699 |
| Speed: | 353 fps |
| Axle-to-Axle: | 33 5/16″ |
| Weight: | 4.8 lbs |
| Brace Height: | 7 5/8″ |
| Draw Length: | 31 1/4 – 33″ |
| Draw Weight: | 50, 60, 65, 70, 75, 80 |
| Let-off: | 75, 80, 85% |
Darton TriTech V2
Darton has been quietly turning heads over the last couple of seasons. Building off of the success of last year’s hyper-tunable TriTech series, the new TriTech V2 steps things up.
The first thing you will notice when picking up the V2 is the weight drop. Through a redesigned riser, updated limb pockets, and titanium hardware Darton shaved nearly a quarter-pound off the bow compared to last year’s model.
Those redesigned limb pockets also accept Darton’s new Third Leg Bow Stand attachment, letting you pair it with their Foldable Bow Stand to keep your bottom cam out of the dirt in a ground blind or at the range.
On the tuning front, Darton found practical ways to make an already adjustable bow even easier to dial in. A new FAST Arrow Tune Indicator built into the riser lets you lay an arrow right into a machined reference slot to align your rest dead-straight before you ever shoot through paper.
The three different tuning systems that made the TriTech so easy to tune are still here- the adjustable roller guard, limb pockets, and yoke hangers. Even better, their Perfect-Timing Yoke Hangers are now toolless, meaning you can tweak cam sync in seconds without an allen wrench or bow press.
The TriTech V2 uses the same BBS Dual Sync cam system with quarter-inch draw length increments. Darton also scores major points for value by including both comfort and speed mods with a 75% let-off mod sold separately.
Available in 31-inch, 33-inch, and 35-inch axle-to-axle models, plus a dedicated 35-inch Long Draw option that stretches out to 32 inches, the V2 keeps the core shooting DNA of the original while trimming fat and simplifying setup.
TriTech V2 31
| Price: | $1349.99 |
| Speed: | 334-343 fps |
| Axle-to-Axle: | 31 3/16″ |
| Weight: | 4.32 lbs |
| Brace Height: | 6 3/8″ |
| Draw Length: | 25 – 30 1/2″ |
| Draw Weight: | 50, 60, 70, 80 |
| Let-off: | 83 or 75% |
TriTech V2 33
| Price: | $1349.99 |
| Speed: | 334-343 fps |
| Axle-to-Axle: | 33 3/16″ |
| Weight: | 4.45 lbs |
| Brace Height: | 63/8″ |
| Draw Length: | 25.5-31″ |
| Draw Weight: | 50, 60, 70, 80 |
| Let-off: | 83 or 75% |
TriTech V2 35
| Price | $1349.99 |
| Speed: | 332-336 fps |
| Axle-to-Axle: | 35 1/8″ |
| Weight: | 4.55 lbs |
| Brace Height: | 6 3/8″ |
| Draw Length: | 25 – 31 1/2″ |
| Draw Weight: | 50, 60, 70, 80 |
| Let-off: | 83 or 75% |
TriTech V2 35 LD
| Price | $1349.99 |
| Speed: | 327-333 fps |
| Axle-to-Axle: | 35 1/8″ |
| Weight: | 4.6 lbs |
| Brace Height: | 6 7/8″ |
| Draw Length: | 26 1/2 – 32″ |
| Draw Weight: | 50, 60, 70, 80 |
| Let-off: | 83 or 75% |
PSE ODIN
PSE’s latest carbon series is the all new Odin, the only American-Made Carbon bow currently on the market.
The flagship Odin Carbon comes in at a versatile 34-inch axle-to-axle length, while the compact Odin Sub 30 drops down to 29.5 inches. Both models are available with either the standard FDS cam or the FDS XL for longer draw shooters.
Rounding out the family is the Odin Specialist, which pairs that same compact frame as the Sub 30 with the FDSM cam and lighter draw weights for shorter-draw archers.
Visually, PSE traded the softer curves of their previous carbon risers for sharper, more angular lines while keeping bare bow weight down around 3.8 pounds.
The biggest mechanical upgrade, however, is the new Limb Vise 2 pocket system. PSE built its EZ 220 shim technology directly into the limb pockets, allowing you to loosen two bolts and swap spacers to make macro left-or-right tuning adjustments without needing a bow press.
You can still use the cam shims for fine micro-tuning, making this one of the easiest bows on the market to get shooting bullet holes.
The FDS cam system delivers plenty of speed without the harsh draw cycle of a dedicated speed bow, especially when paired with a forgiving 6.75-inch brace height on the 34-inch model.
For 2027, PSE also replaced the old round rubber bumpers on the modules with flat, square limb pads for a noticeably firmer back wall, alongside four let-off settings ranging from 70 to 85 percent.
Complete with front Picatinny sight mounts, rear IMS dovetails for your rest, and a low mounted Killshock damper, the Odin comes in right at $2000.
ODIN Carbon
| Price: | $1999.99 |
| Speed: | 340 | 366 fps |
| Axle-to-Axle: | 34″ |
| Weight: | 3.8 lbs |
| Brace Height: | 6 5/8 | 6 7/8″ |
| Draw Length: | 26-31.5 | 27.5-33″ |
| Draw Weight: | 70, 75, 80, 85 |
| Let-off: | 70-85% |
*FDS Cam | FDS XL Cam
ODIN Sub 30
| Price: | $1999.99 |
| Speed: | 346 | 357 fps |
| Axle-to-Axle: | 29 1/2″ |
| Weight: | 3.6 lbs |
| Brace Height: | 6 | 6 1/4″ |
| Draw Length: | 24.5-30 | 26-31.5″ |
| Draw Weight: | 50, 60, 70, 80 |
| Let-off: | 70-85% |
*FDS Cam | FDS XL Cam
ODIN Specialist
| Price: | $1999.99 |
| Speed: | 330 fps |
| Axle-to-Axle: | 29 1/2″ |
| Weight: | 3.6 lbs |
| Brace Height: | 5 7/8″ |
| Draw Length: | 24 1/8 – 28 1/8″ |
| Draw Weight: | 40, 50, 60 |
| Let-off: | 65-80% |
Prime HOLD
On paper, Prime is rolling out an eight-bow lineup for 2027 with the new Hold series, spanning 31, 33, 35, and 37-inch axle-to-axle lengths in both 6-inch and 7-inch brace height options.
In reality, though, you are looking at the exact same bow design offered in eight tailored configurations.
Prime has been running its Advanced Structures Technology (AST) riser for a couple of years now, which pairs machined aluminum with structural carbon rods. Because of that modular carbon-rod construction, Prime only needs two core riser builds (a 6-inch and a 7-inch brace height) and can simply extend those carbon tubes to hit each axle-to-axle length.
It is a smart engineering shortcut that lets you pick the exact speed, forgiveness, and draw length window you want without changing how the bow fundamentally behaves.
The biggest mechanical upgrade for 2027 is Prime’s new Align tuning system. Previous Prime bows relied on a cam shim kit that got the job done, though it was far from user-friendly. The Align system fixes that headache by letting you shift the entire limb pocket, limbs, and cam assembly left or right using just a standard Allen wrench, with no bow press required.
If you see a slight nock tear through paper, you simply remove the outer cap screw and dial the pocket over until you are shooting bullet holes.
Powering the bow is the new CentraX cam system, which delivers a noticeably smoother draw cycle than past Prime models without giving up real-world speed. Draw lengths are still handled through dedicated modules in half-inch increments, and Prime added multiple draw-stop positions on both the inside and outside of the cam so you can customize the exact feel of the back wall at full draw.
Prime also refined its cold-weather aerogel grip into the new screwless Nano 2 grip, flattening out the back profile to eliminate the slight edge roll of the older design. Paired with Prime’s center-balanced grip geometry, Swerve riser, three-position Picatinny sight mount, IMS rest dovetail, and a direct-mount rear stabilizer bushing, the Hold lives up to its name by locking onto the target with minimal pin float.
Between the modular sizing options and the welcome switch to press-free pocket tuning, the Hold is easily the most user-friendly hunting flagship Prime has ever built.
HOLD 31
| Price: | $1495 |
| Speed: | 333 | 325 fps |
| Axle-to-Axle: | 31″ |
| Weight: | 4.1 lbs |
| Brace Height: | 6 | 7″ |
| Draw Length: | 25.5-30.5 | 26.5-31.5″ |
| Draw Weight: | 40, 50, 60, 65, 70, 80 |
| Let-off: | 70-85% |
HOLD 33
| Price: | $1495 |
| Speed: | 334 | 326 fps |
| Axle-to-Axle: | 33″ |
| Weight: | 4.2 lbs |
| Brace Height: | 6 | 7″ |
| Draw Length: | 26-31 | 27-32″ |
| Draw Weight: | 40, 50, 60, 65, 70, 80 |
| Let-off: | 70-85% |
HOLD 35
| Price: | $1595 |
| Speed: | 332 | 324 fps |
| Axle-to-Axle: | 35″ |
| Weight: | 4.3 lbs |
| Brace Height: | 6 | 7″ |
| Draw Length: | 26.5-31.5 | 27.5-32.5″ |
| Draw Weight: | 40, 50, 60, 65, 70, 80 |
| Let-off: | 70-85% |
HOLD 37
| Price: | $1595 |
| Speed: | 330 | 322 fps |
| Axle-to-Axle: | 37″ |
| Weight: | 4.5 lbs |
| Brace Height: | 6 | 7″ |
| Draw Length: | 27-32 | 28-33″ |
| Draw Weight: | 40, 50, 60, 65, 70, 80 |
| Let-off: | 70-85% |
Final Thoughts
It’s never been easier to get your bow shooting bullet holes through paper. And the need for tools like a bow press are getting less and less each year.
The big question in my mind is how all these systems, with all their moving parts, will hold up over time? Will all the complexity lead to bows more easily coming out of tune over time, or increase possible failure points in the overall system?
We won’t know these answers for some time, but I am certainly here for the ride.



