There seems to be two distinct schools of thought when it comes to pruning shooting lanes, most gravitate to one end or the other with a few folks hovering in the middle. On the one hand you have guys that don’t like to cut anything they don’t absolutely have to, in fact these extremist at times won’t cut a single limb and just rely on the deer to step through a tiny opening at the moment of truth. You can probably tell by my description this mindset doesn’t include me.
The other school of thought is to make sure you have a clear shot with reasonable shooting lanes in any possible area the deer could travel through. The obvious down side is you open yourself up more to be picked off and you disturb the deer’s living room at some point. I tend to lean more in this direction but am cautious as not to open things up too much and ruin a stand site.
The ramifications of too much or too little are huge. If you film your hunts like I do, you need to consider camera angle and not having to focus through a lot of limbs to capture the image; if you take too many limbs it leaves a huge hole that lends itself nicely as a focal point for the deer’s line of sight. You want at least three good shooting lanes, preferably one to each side at an angle to your stand and another one straight in front of you. I realize many like to have their stand on the back side of a tree for concealment but this makes it very difficult if not impossible to film your own hunts.
An extendable power chain saw is very effective when you have many limbs or larger limbs to do prune
Where is the fine line between these two you may ask? I have an approach that may take advantage of the best of both words. Take some time during the late Winter months while out hiking or shed hunting and do your heavy pruning; you know that one big limb 20 yards out 18 feet up that always seems to be between you and the deer, take out a pole chain saw, extendable hand saw or even a small hand saw that you can duck tape to a sapling and get that limb down. Do your massive pruning directly after season if you have determined to keep that stand site. There are three benefits, one is having less of an impact on the deer you are hunting, two is you will open things up but allow new spring growth to come back in and camo up your area a bit; last but not least you are putting more tree buds on the ground for the deer to browse, why not do it when they need food the most?
Don’t be afraid to use a large saw for nuisance trees in the winter months as long as the land owner doesn’t mind.
Doing this late season pruning isn’t a catch all, you will still need to pop a few little twigs out of the way come late summer or fall, but it will be with minimal disturbance. Late summer is a great time to slide in there and take a hand saw and quietly snag a few nuisance limbs. The perfect tool for small touch up or public land pruning where chainsaws may not be allowed is the Hooyman extending saw. This model reaches around ten feet, or can be used as just a hand saw, and folds up small enough to take on each hunt if necessary
I don’t personally like climbing stands but if I did, this would be a must have tool
I find there is always that one little twig that seems to cause most of the problems, but I have eliminated that by toting this aluminum I beam framed saw along with me
Get out in the woods during late winter and don’t let that one little limb or big limb keep you from your trophy next fall. You will be amazed how your success rate goes up once you take out the limb factor excuse. Remember to be safe when using saws in trees and always have a safety harness on.
Until next time, be safe and God bless