Bow Scopes (125 Products)

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

The #1 lens (yellow dot on aperture) is a weak clarifier lens which can be used with any scope. The #2 lens (green dot on aperture) is a standard clarifier. This lens will usually work best with a 3, 4 or 6 power scope lens or larger. The #3 lens (red ...

A must for the IBO or ASA circuit of card puncher is required for scoring.

These pins are CNC machined from 318 stainless steel and are tapered to a point with a small .030 diameter ball at the tip. They are designed to fit into the holes of the housing with a shoulder that positions the ball tip precisely in the center of t...

These pins are CNC machined from 318 stainless steel and are tapered to a point with a small .030 diameter ball at the tip. They are designed to fit into the holes of the housing with a shoulder that positions the ball tip precisely in the center of t...

The Classic Scope has a sight window of Magnum 1-5/8 in diameter and Large 1-1/4, machined from 6061-T6 aluminum. Windage rods are 10/32. Each scope is drilled and tapped to allow for a wide variety of sight aiming devices to be installed and includes ...

The Classic Scope II is identical to the original Classic Scope with a few less features. Magnum scope inside diameter is 1-5/8 and the Large scope diameter is 1-1/4They have eliminated the fine crosshairs and a few of the fiber locking holes to provid...

Replacement fibers for the Classic Scope or any scope.

The Lens Retainer is machined to close tolerances from Delrin because of its strength and lightweight and is available in Large or Mag size.